ID-Mobile Global Guide
243
1. Adjust the output limits. If you want them to be constants, write the constants into the
box. Otherwise connect the inputs to any other analog objects (e.g. PLC setpoints).
2. Adjust the output rates for raising and lowering. If you want them to be constants,
write the constants into the box. Otherwise connect the inputs to any other analog
objects (e.g. PLC setpoints).
3. Adjust the output bias value. If you want it to be constant, write the constant into the
box. Otherwise connect the input to any other analog object (e.g. PLC setpoint).
4. Rename the output.
Note:
The inputs are assigned to their sources in the sheet by
dragging a wire
from the
input to the source.