ID-Mobile Global Guide
250
1. Adjust the delay of rising edge. If you want the delay to be a constant, write the
constant into the box. Otherwise connect the input to any other analog object.
2. Adjust the delay of falling edge. If you want the delay to be a constant, write the
constant to the box. Otherwise connect the input to any other analog object.
3. Rename the output.
4. Select the operation mode (described above).
Note:
If Input time up or Input time down value is <0, this input is internally set to zero.
Note:
The inputs are assigned to their sources in the sheet by
dragging a wire
from the
input to the source.
