ID-Mobile Global Guide
44
Control window: displays all ID-MOBILE and I/O states, enables engine control.
Setpoints: listing and adjusting
Values: reading of all I/O include external modules
History list: complete history list.
5.1.5 Password protection
Password is a four-digit number in 0 – 65535 range. Only setpoints associated with the entered password level
can be modified.
There are three levels of password protection.
0.
User level allows change of non-protected setpoints only
1.
Operator level allows change of setpoints protected by Operator level 1.
2.
Master level allows change of setpoints protected by Operator 1. and Master level 2.
3.
Supervisor highest level allows all setpoints or configuration changes, firmware upgrade.
There can be password protected:
Setpoints (depends on configuration)
Statistics values (Level 3 only)
Engine commands (depends on configuration)
Even though one level may have been set from the front panel, the affected setpoints are not accessible from
DriveMonitor (direct or Modem) until this level is set in DriveMonitor (direct or Modem). Setpoints opened from
front panel are automatically closed 15 minutes after the last key has been depressed or when wrong value of
password is set.
Password is a four-digit number. Only setpoints associated with the entered password level can be modified.
Any password can be changed once that level or supervisor (highest) password has been entered.
Configuration lock
Selection is available in Modules window and can be selected just in On-line mode, because this info is stored in
controller memory. Locked configuration file can be loaded from controller but is not visible and cant be modified
without password setting.
