ID-Mobile Global Guide
12
2.1.3 Alarm
Incoming Alarm indication. Because no Fault reset is expected for controller the new incoming Alarm activates
steady state light for 60min. Any new alarm during this 60 minutes causes 2 sec fast blinking and prolong the
Alarm LED for next 60min. Auto quitted function disable the Alarm LED after 60 minutes after the last alarm
even if is still active.
2.2 Dimensions and assembly
The ID-Mobile chassis is assembled with two parts (controller case and controller cover). Both parts are
connected together with 19 bolts (2.9 × 16m).
Note:
The unit is completed with two screws for the delivery. The rest of screws are attached so the unit can be
completed before applying. The main reason is to be plug-in modules (GPS, GSM, GPRS) easily applicable.
2.2.1 Disassembling
Screw out 19 bolts from the bottom side of the controller case.
Gently divide controller cover and case.
Watch the GPS/GPRS antenna interconnections (if applicable).
The silicone sealing is lubricated some lube could be present in the joint.
