Appendix B: Command reference
98-140012-H
SMS remote commands
147
<ping_always>
0
1
NA
Send ping only if no traffic.
Always send ping, regardless of data traffic.
Placeholder when no value is specified. Note that the existing setting applies.
<ping_interval>
<integer>
NA
Interval between pings (minutes).
Placeholder when no value is specified. Note that the existing setting applies.
<ping[1/2/3]>
<IP addr>
NA
Three ping destination IP addresses.
Note
: You must fill in all three places.
0.0.0.0
means any previously entered IP address in this position is deleted.
Placeholder when no IP address is specified. Note that any previously
entered IP address is maintained.
<pos_response> 0
1
NA
Send an sms response
a
.
Do not send an sms response
a
.
Placeholder when no value is specified.
<pwd>
<APN
password>
NA
CLR
Password associated with APN username.
Placeholder when no APN password is specified. Note that any previously
entered password is maintained.
Password is not used.
<qos>
1
Standard/background data (currently the only qos available for M2M).
<reset_type>
1
Normal delay restart.
<resp_mode>
0
1
2
3
None – send no responses to AT commands.
Immediate - immediate responses, but not unsolicited.
Final – suppress immediate if OK, plus unsolicited.
All – send both immediate and unsolicited responses.
<rsms_pwd>
<rsms_pwd>
Remote SMS password. The password must be 5 to 15 characters long and
cannot contain spaces.
Accepted characters are: A through Z (uppercase characters), a through z
(lowercase characters) and 0 through 9 (numeric characters).
<sms_number>
<sms_number>
NA
The phone number to be used for sms response
Placeholder when no value is specified.
<user>
<APN user
name>
NA
CLR
User name associated with APN.
Placeholder when no APN user name is specified. Note that any previously
entered user name is maintained.
User name is not used.
a. Position SMS response is only for future use, and should be set to NA
Parameter
Values
Meaning
