Chapter 3: To use the EXPLORER 710
98-140012-H
To charge your smartphone or tablet
46
To charge your smartphone or tablet
To charge your smartphone or tablet, connect
it to the USB interface next to the power
button on the EXPLORER 710. The connector is
a standard USB A connector.
To see alerts
When an event requiring the attention of the user occurs, the display shows a warning icon
warningsign
.
To see a list of active alerts in the display, do as follows:
1. From the display menu, select
Alerts
.
2. Select an alert to see details.
All alerts and other events are logged in the Event log
Terminal settings in display
To adjust the display
To adjust the display brightness and timeout, do as follows:
1. From the display menu, select
Settings > Display
.
2. Select
Brightness
and select the wanted level with
OK
.
3. Select
Settings > Display > Timeout.
4. Select the period of time the display light should stay on after the last key is pressed.
Automatic power up
The default behavior of the EXPLORER 710 is to power up automatically when you connect
external power. If you wish, you can change this power up mode, so that the EXPLORER 710 is
only powered if the Power button is pressed. To switch between automatic and manual power
up of the terminal, do as follows:
1. From the display menu, select
Settings > Power up mode.
2. Select
Auto
or
Manual
.
• Auto: The EXPLORER 710 powers up automatically when external power is applied
• Manual: The EXPLORER 710 powers up only when the power button is pressed
Note
There are two levels of charge current, 0.5 A or 2.0 A. Use the web interface to select
the charge current for your device. See
.
