COBHAM Explorer 710, User Manual

Page: 15 / 181

Chapter 1: Introduction to EXPLORER 710
98-140012-H Your EXPLORER 710 terminal 6
Display menu
User interfaces
The
keypad and display
described in the previous section are used for pointing the antenna,
starting and stopping data sessions, enabling or disabling interfaces and for displaying status
and changing simple parameters. To obtain full access to all features and for ease-of-use, you
should use a computer or smartphone and the web interface.
The
web interface
is a built-in web interface for easy configuration and daily use. The web
interface is accessed from a computer, smartphone or tablet connected to the EXPLORER 710,
using an Internet browser. No installation of software is needed. For further information on the
web interface, see
To use the web interface on page 48.
A
smartphone app
,
EXPLORER Connect
, is also available. The app includes a satellite
phone function that enables you to make calls to and from your smartphone over the satellite
network using the EXPLORER 710 terminal. It also includes the complete feature set from the
built-in web interface of the terminal, allowing you to set up and use the terminal with your
smartphone. See
The EXPLORER Connect app on page 9.
With
AT commands
you can configure and control the EXPLORER 710 from a computer
using a Telnet session. For details see To access the terminal using AT commands on page 37.
With
SMS commands
you can configure and control the EXPLORER 710 remotely. For
details, see Remote access with SMS on page 37.
5 seconds
30 seconds
1 minute
2 minutes
5 minutes
Level 1
Level 2
Level 3
Level 4
Level 5
Level 6
Level 7
English
Français
Deutsch
Русский
Español
中文
日本 語
Português
Display
Audio indication
Power-up mode
Language
IP address
Hardware
Software
Conformity
IMEI
Automatic
Manual
Brightness
Timeout
Exit
Point now
Settings
Properties
Help desk
Alerts
Pointing
On
Off
Unit serial number
Antenna serial number
MAC for LAN
MAC for WLAN