COBHAM Explorer 710 User Manual Download Page 138

Page: 138 / 181

Chapter 5: Maintenance and troubleshooting

98-140012-H

Troubleshooting

129

10206

Closing terminal
due to high
temperature

Terminal has reached a
critically high temperature,
and will reboot by itself.

Move the terminal to a
cooler location.

10208

POE disabled due to
high temperature

The temperature in the
terminal is too high. PoE is
disabled to reduce the
temperature. (not port 1)

Move the terminal to a
cooler location, or avoid
using PoE.

10300

Updating
software...

Software update has begun.

Wait for the software update
to complete.

10301

Do not remove DC
power from terminal
during software
update

Software update is ongoing
and the battery is low. Do not
remove DC power from the
terminal while software
update is ongoing.

If DC power is not
connected, connect it as
soon as possible and leave it
connected until software
update is completed.

10302

Preparing for
software update

Initial preparations for
software upload are started.

Wait until preparations are
over, either the terminal is
rebooted or an error is
shown.

10303

Error opening
software file

The file requested to use for
the update procedure cannot
be opened or found.

Make sure the update file is
correct and the file exists.
Use the command

_IUPDFW?

to show the

correct file name before
updating.

10304

Battery level too
low for software
update

The battery level is too low to
perform software update.

Charge the battery (connect
to DC power) before
updating the software.

10305

Software downgrade
prevented. Use a
newer software
version.

Not possible to perform a
software downgrade, use a
newer version.

Use a newer version of
software for the update, or
contact your distributor.

10306

File does not
support this
product

The file used for software
update does not support this
product.

Use the correct tiif file

10307

File is corrupt.
Download the file
again.

The file used for software
update appears to be corrupt
and the content cannot be
validated.

Download the file again

Event ID
(Hex)

Displayed text

Explanation

Remedy

Summary of Contents for Explorer 710






















































































































































































Search results

Summary of Contents for Explorer 710

Reviews:

Related manuals for Explorer 710

Brands by name

Popular brands

COBHAM Explorer 710, User Manual

Search results

Summary of Contents for Explorer 710

Reviews:

Related manuals for Explorer 710

Brands by name

Popular brands