COBHAM Explorer 710 User Manual Download Page 139

Page: 139 / 181

Chapter 5: Maintenance and troubleshooting

98-140012-H

Troubleshooting

130

10308

Software update
failed. Try running
the update again.

Software upload failed to
initialize, can be a sporadic
issue.

Try running the update
again.
If the problem persists,
contact your distributor.

10309

Software update
failed. Update to
the latest software
version.

The software has been rolled
back to the previous version
prior to starting the software
upload. The new image was
not validated correctly.

Try running the update
again, if the problem persists,
contact your distributor.

1030A

Software failed.
Update to the
latest software
version from Safe
Mode.

Not all subunits have been
properly verified with the
new image.

Attempt software update
procedure again,
alternatively from Safe
Mode if the problem persists.

1030B

Antenna software
failed. Update to
the latest software
version from Safe
Mode.

The antenna software could
not be verified.

Attempt software update
procedure again,
alternatively from Safe
Mode if the problem persists.

The antenna is a subunit
with relation to the software
update process, and if that
particular unit fails, this
event is raised instead of
0x1030A

1030C

Software update is
already started

Another software update
cycle is currently running.

Wait until the current
software upload has finished.

1030D

Software version is
already installed

The software image you are
trying to install is already
active on the terminal.

Update with a different
image as it is prohibited (and
nonsensical) to start a sw
update process with the
same image.

1030E

Software update
forced roll-back

Software update failed and
the terminal forced a roll-
back to the previous version.

Check that you have the
correct file for software
update and try again.
If the problem persists,
contact your distributor.

11001

Calibration error

Invalid calibration values
found.

Contact your distributor.

Event ID
(Hex)

Displayed text

Explanation

Remedy

Summary of Contents for Explorer 710






















































































































































































Search results

Summary of Contents for Explorer 710

Reviews:

Related manuals for Explorer 710

Brands by name

Popular brands

COBHAM Explorer 710, User Manual

Search results

Summary of Contents for Explorer 710

Reviews:

Related manuals for Explorer 710

Brands by name

Popular brands