COBHAM Explorer 710, User Manual

Page: 40 / 181

Chapter 3: To use the EXPLORER 710
98-140012-H User interfaces 31
To enable or disable an interface
To enable or disable interfaces with the display and keypad
To enable or disable an interface, do as follows:
1. In the top of the display, locate the interface you want to enable or disable.
2. Use the arrow keys on the keypad to highlight the interface you want to enable or disable.
3. Press
OK
to toggle between enable and disable.
The interface is grayed and crossed out when disabled.
To enable or disable interfaces with the web interface
To enable or disable an interface using the web interface, do as follows:
1. Connect your smartphone, tablet or computer to the EXPLORER 710, using the LAN or
WLAN interface. See:
•
To connect to the LAN interface on page 21
• To connect to the WLAN interface on page 20
2. To access the web interface, open your browser and type the IP address of your
EXPLORER 710
1
(default IP address: 192.168.0.1).
For further information on the web interface, see To use the web interface on page 48.
Note
By default, only the LAN interface is enabled. However, you can enable or disable each
of the interfaces independently.
Note
It may take some seconds to enable an interface. When the icon stops pulsating
and is no longer crossed out, the interface is enabled.
If you cannot enable/disable an interface, it may be because the User permissions
do not allow it. See
To set up user permissions on page 93.
WLAN ISDN LAN Phone USB
Note
By default, only the LAN interface is enabled. However, you can enable or disable each
of the interfaces independently.
1. You find the IP address in the display menu system by entering the menu and selecting
Properties > IP address.