Chapter 4: To use the web interface
98-140012-H
Advanced settings
101
Prepare the terminal for remote access with IP
1. From the
Remote management
page, locate the section
Remote access with IP
.
2. Select
Enable access to web application
and/or
Enable access to AT commands
.
3. Type in the
Incoming port
numbers to use for the web server and for AT commands.
The default port numbers are:
• web server: 80
• AT commands: 5454
4. Under
Trusted IP addresses
, click
Add IP address
and type in the IP address of the
device you want to give access to the terminal.
5. To add more IP addresses, click
Add IP address
again.
6. Select
Enable ping response
if you want to enable the terminal to respond to ping
commands.
After preparing the terminal and activating the connection you can access the terminal from
one of the trusted IP addresses, using the incoming port defined in the Incoming port field.
For information on how to access the terminal, see
To get remote access from a trusted IP
address (preconfigured) on page 40
If Static IP is included in your airtime subscription, we recommend using this static public IP
address for the terminal in order to provide easy access to the terminal. To use the static IP
address, it must be included in your airtime subscription and you must set the APN source to
SIM default. For details, see
To change the APN for a connection package on page 80
.
Note
The settings for Remote access with IP are
not
relevant if you are using the SMS
ATCO command
_IREMWEB
to get access to the web interface from a remote
location, or you only need remote access by SMS commands.
For details on SMS commands, see the next section and
. For details on how to use the
_IREMWEB
command, see
commands to get remote access to the web interface on page 39
Note
If you type another port number, the port number must be available at your
service provider.
Note
To be able to access the terminal you must have an active data connection.
