Amplified VHF & UHF Combo TV Antenna
with J-Pole Mount
SKU: O0000-0555
What
’
s in the box?
Antenna Specification
PSU Specification
18dB
465mm
8
Frequency
Range
Impedance
No. of
Elements
Ampli
fi
er
Gain
Noise Figure
Antenna
Length
174-230MHz
470-862MHz
3-5dBi
8-10dBi
<
4dB
O
0-40 C
0.8dB
40-862MHz
Power Input Power Output
Insert Loss
Operating
Temperature
Range
Short-circuit Protection
Orange LED turns red
if short-circuit happens
How To Install
Step 1. Unfold the VHF elements (U-shape, next to the bracket) until they
'
re at right angel to the
plas c boom, the
n fi
x them with the wing nuts (Refer to Graph. A).
Step 2. A ach the antenna to a pole towards the direc on of your local TV tower, the
n fi
x it with
the bracket an
ghten the wing nuts (Refer to Graph. B).
Step 3. Use a piece of coaxial cable to connect the F connector on the antenna, and the F connector
on the PSU marked “IN”.
Step 4. Use a piece of coaxial cable to connect the F connector on the PSU marked “TV”
,
and the
Antenna Input on your set-top box or digital TV set.
Step 5. Plug the PSU into a socket, turn on your TV and run a channel scan. If you’re not receiving all
your local channels, you may try to adjust the direc on of the antenna in order t
o fi
nd out the
correct direc on of your local TV tower. Don’t forget to re-scan the channels ever
me you
change the antenna’s direc on.
STB
or TV
IN
TV
AC110V 60Hz DC12V 100mA
Antenna x1 Power Supply Unit (PSU) x1 1.5m coaxial cable (from PSU to TV) x1
21" J-shape Pole x 1
Mounting Base x 1 User Manual x 1
Φ6*19mm screw x 2 Φ6*43mm screw x 1
Φ6mm hexagon nut x3
Φ7*45 mm Plastic Anchor Bolt x 2
