manualshive.com logo in svg

Coachman 2022, Owner'S Handbook Manual, Page: 75 / 208

Share
Download
Coachman 2022 Owner'S Handbook Manual Download Page 75

Refrigerator operation

74

www.coachman.co.uk

O

w

ners h

andb

o

ok 

2

02

2

Coachman Caravan Company Limited, Amsterdam Road, Sutton Fields Industrial Estate, Hull, HU7 0XF

Intended use

The device is suitable for:
•   Installation in caravans and  

motor homes

•    

Cooling, deep-freezing and storing food

The device is

 not

 suitable for:

•    Storing  medications
•    

Storing corrosive substances or 
substances that contain solvents

•    

Quick-freezing food

Technical description

The refrigerator is an absorber 
refrigerator and is designed for operation
•   on a DC power supply (12 V)
•   on an AC power supply
•   with liquefied gas (propane or butane)

The refrigerator has an automatic 
operating mode that selects the most 
economical type of energy connected. 
The refrigerator unit operates silently.

1

Summary of Contents for 2022

















































































































































































































Reviews:

No comments