manualshive.com logo in svg

Coachman 2022, Owner'S Handbook Manual, Page: 56 / 208

Share
Download
Coachman 2022 Owner'S Handbook Manual Download Page 56

Connecting ser vices - Control panel

55

O

w

ners h

andb

o

ok 

2

02

2

• Mains current

• Solar current

• Internal temperature

• Water level

• Battery source

• Pump source

The Seattle control panel also allows  
the user to:

•  Switch on/off all non-essential 

electrical appliances/accessories

• Switch on/off the lights

• Change the pump mode

• Switch on/off the pumps

•  Force the internal pump to run  

(For purging pipes)

• Switch on/off the awning light

• Calibrate water/waste probes

The Seattle control panel also has 
optional audio and visual warnings for:

• Battery overvoltage/current alarms

• Battery under voltage alarms

• High solar current alarm

• Communication error

• Empty water tank

• Fuse blown alarms

Function Buttons:

Navigation Buttons: 

Use the     and     buttons to navigate 
up and down through menus. Pressing 
the button will allow the user to enter 
menus or change settings (If further 
settings are available).

Master Button:

When the Master Button is pressed the 
control panel will switch power to all  
non-essential accessories. Some 
features require the Master Button to be 
switched on to be enabled.

NOTE: Some of the options or 
features highlighted above are not 
available on selected models.

NOTE: Essential appliances may 
remain powered when the master 
switch is off, for example the Alarm 
or Fridge.

Summary of Contents for 2022

















































































































































































































Reviews:

No comments