manualshive.com logo in svg

Coachman 2022, Owner'S Handbook Manual, Page: 175 / 208

Share
Download
Coachman 2022 Owner'S Handbook Manual Download Page 175

Ser vicing/Warrant y

174

www.coachman.co.uk

O

w

ners h

andb

o

ok 

2

02

2

Coachman Caravan Company Limited, Amsterdam Road, Sutton Fields Industrial Estate, Hull, HU7 0XF

as detailed in this handbook. 

All Coachman models have been certified 
by the National Caravan Council for 
compliance with stringent European 
Standards, British Legislation and industry 
set Codes of Practice, specifically relating 
to health and safety issues. The approval 
process covers the testing and inspection 
of critical areas of the product from fire 
safety, weights and dimensions to gas, 
electrics and ventilation.

Additionally, we believe that 
comprehensive and efficient aftercare 
support is vital in today’s market.  
To reflect this and the confidence we  
have in our products, every caravan 
produced by Coachman Caravan 
Company Limited comes complete  
with a three    year manufacturer’s 
warranty.

This warranty is conditional on annual 
servicing being carried out as detailed  
in the following pages. This warranty  
is designed to reaffirm our commitment  
to you. 

Your supplying dealer is responsible 
for carrying out a thorough pre-delivery 
inspection on your caravan and also 
arranging for any warranty work or 
routine servicing which may be required. 
Authorised dealers will be able to supply 
any replacement parts for your caravan 
should the need arise along with any 
accessories you may require. Please note 
it is not possible to purchase or obtain 
replacement parts or accessories from 
Coachman Caravan Company Limited, 
they must be supplied by your dealer or 
approved servicing centre.

All new caravans must be registered 
with us by your supplying dealership. 
To activate this warranty your selling 
dealer must complete with you the 
online registration at the time of 
collection. 

It should be noted that distributors and 
dealers are not the agents of Coachman 
Caravan Company Limited and therefore, 
are not authorised to bind the company 
by any specific or implied undertaking or 
representation. 

Repairs

If you damage your caravan or it should 
require repairing for any reason, please 
contact your supplying dealer. These 
repairs must be carried out by an 
authorised dealer or approved servicing 
centre using Coachman genuine parts, 
recommended sealant and following 
Coachman procedures.

All Coachman caravans are classed as 
portable and therefore all warranty work 
requires the caravan to be delivered 
and collected from the supplying dealer 
or approved servicing centre. The cost 
of transporting, towing or moving the 
caravan to and from the place of repair is 
the responsibility of the owner.

Summary of Contents for 2022

















































































































































































































Reviews:

No comments