Coachman 2022 Owner'S Handbook Manual Download Page 104

Page: 104 / 208

Inserting the VG fresh base

• Remove the vegetable compartment.

• Insert the VG fresh base.

• Put the vegetable compartment back in.

Removing the VG fresh base

• Remove the vegetable compartment.

• Remove the VG fresh base.

Defrosting the refrigerator

• Switch off the refrigerator.

• Disconnect the energy supply.

• Empty the refrigerator.

Refrigerator operation

103

ners h

andb

Positioning the shelves

Using the VG fresh base

Only RMD10.5T, RMD10.5XT

Storing fruits and vegetables optimally

Using the slider in the VG fresh base, the
humidity in the vegetable compartment
below can be regulated.

Warning

Children beware!
• All shelves are fixed in place to

prevent children from climbing
inside the refrigerator.

• Only remove the shelves for

cleaning purposes.

• Afterwards, refit the shelves in

the same position and lock them
in place.

ºC

SET

Warning

Children beware!
The maximum load capacity of the VG
fresh base is 5.5 kg.

ºC

SET

Warning

Children beware!
To remove the vegetable compartment,
the door must be open ≥ 90°.

ºC

SET

Warning

Children beware!
Do not use mechanical tools or a hair
dryer to remove ice or loosen frozen items.

ºC

SET

Warning

Children beware!
Over time, frost builds up on the cooling
fans inside the refrigerator. If this layer
of frost is about 3 mm thick, you should
defrost the refrigerator.

ºC

SET

Summary of Contents for 2022

















































































































































































































Search results

Summary of Contents for 2022

Reviews:

Coachman 2022, Owner'S Handbook Manual, Page: 104 / 208

Search results

Summary of Contents for 2022

Reviews: