manualshive.com logo in svg

Coachman 2022, Owner'S Handbook Manual, Page: 135 / 208

Share
Download
Coachman 2022 Owner'S Handbook Manual Download Page 135

Caravan equipment

134

www.coachman.co.uk

O

w

ners h

andb

o

ok 

2

02

2

Coachman Caravan Company Limited, Amsterdam Road, Sutton Fields Industrial Estate, Hull, HU7 0XF

(1 level or 3 levels dependent on model).   
6. Pull handle.  7. Pour out spout.  8. 
Cap with measuring cup.  9. Automatic 
pressure release vent.  10. Vent button.   
11. Sliding cover.  12. Blade opener.   
13. Waste holding tank mechanism.   
14. Wheel.  15. Service door.  16. Waterfill 
door (only for C262 model).

Introduction

This Thetford cassette toilet is a high 
quality product. It is user friendly, meets 
high quality standards and gives you all 
the convenience of home.

For the latest version of the manual please 
visit www.thetford.eu

Preparing for use

This cassette toilet has a waste holding 
tank of 17.5LA C262 model has its own 8L 
flush -water tank.  Before using your toilet, it 
is vital that you add toilet additives to these 
tanks.  Check the correct dosage on the 
additive package. Then add ±3L of water to 
the waste holding tank. Fill the flush-water 
tank of a C262 model to the top.

 

Thetford offers a pleasantly scented toilet 
flush for the flush-water tank (Aqua rinse) 
and a variety of waste holding products 
(Aqua Kem Blue, Aqua Kem Green, Aqua 
Kem Natural, Aqua Kem Sachets).

Aqua rinse keeps the flush water fresh, 
ensures a smooth flush and leaves a 
protective layer. All products for the waste 
-holding tank suppress unpleasant smells, 
stimulate the breakdown of waste, reduce 
the formation of gas, protect moving 
parts and help to keep the waste-holding 
tank fresh and clean. For the differences 

between distinguishing qualities of each 
waste holding tank product please visit 

www.thetford.europe.com

The range of toilet products may vary  
for each country.

Use of your toilet

Turning the bowl

You can turn this bowl to a desired 
position (max ±90). Close the cover  
and use both hands to rotate the bowl  
as illustrated.

Opening the blade

The toilet can be used with the blade open 
or closed.  To open the blade, slide the 
blade handle sideways as illustrated.  

     Warning

Never add toilet additives directly via 
the blade as this could damage the lip 
seal of the waste-holding tank. Add 
fluid via the pour out spout.

ºC

SET

!

!

     Warning

Never force if you cannot get the waste-
holding tank back into place easily. If 
blockage occurs, always check if the 
blade handle is in the closed position.

ºC

SET

!

!

Summary of Contents for 2022

















































































































































































































Reviews:

No comments