Torque settings are:
Steel wheels
88Nm
(65 lbs/ft).
Alloy wheels
130Nm
(96 lbs/ft).
Wheel bolt tightening sequence
Before fitting a new wheel, examine it for
distortion or other damage. Ensure that
all mating surfaces are clean and dry,
including bolt seats.
ALWAYS USE THE CORRECT BOLTS
TO SECURE THE WHEEL. THERE ARE
UNIQUE BOLTS FOR ALLOY WHEELS
AND UNDER NO CIRCUMSTANCES
SHOULD ANY OTHER BOLTS BE USED
WITH ALLOY.
Please note with Alloy Wheels you
should first tighten all bolts to 85Nm
(63lbs/ft) then go around again in the
sequence shown and increase the torque
from 85Nm (63lbs/ft) to 130Nm (96lbs/
ft). The correct conical and tapered
wheel bolts (stamped 10.9) must be used.
Safety and Security
IMPORTANT: Your attention is drawn to
the notice affixed in the caravan advising
on fire prevention, ventilation and what
to do in case of fire.
Children
Do not leave children alone in the
caravan. Keep potentially dangerous
items, e.g. matches, drugs etc, out of
reach, as at home.
Fire extinguisher
It is recommended that you provide
one dry powder fire extinguisher, of an
approved type or complying with EN 3-7,
of at least 1kg capacity by main exit door,
and a fire blanket next to the cooker.
Familiarise yourself with the instructions
on the fire extinguisher and the local fire
precaution arrangements.
A fat pan must not have an extinguisher
aimed at it, but must be smothered by a
fire blanket.
In case of fire
1. Get everyone out of the caravan as
quickly as possible using whichever
exit is quickest including windows. Do
not stop to collect any personal items.
Towing and driving/Safet y and securit y
33
O
w
ners h
andb
o
ok
2
02
2
Warning
1. After the first 30 miles check all
road wheel bolts and tighten, if
required, to correct torque setting.
2. Check wheel bolt torque before
each major journey.
3. Never use grease of any kind on
wheel bolts.
ºC
SET
!
!
