manualshive.com logo in svg

Coachman 2022, Owner'S Handbook Manual, Page: 58 / 208

Share
Download
Coachman 2022 Owner'S Handbook Manual Download Page 58

Connecting ser vices - Control panel

57

O

w

ners h

andb

o

ok 

2

02

2

Leisure Battery Voltage  
Display Page:

This page displays the leisure battery 
voltage. If a 230V mains supply is 
connected then the charging voltage of 
the leisure battery will be displayed. If 
the leisure battery is being charged then 
a lightning icon will appear in the battery.

To increase the accuracy of the battery 
voltage reading, switch the “Master 
Switch” off, this will reduce the load and 
give a better indication of the batteries 
voltage level.

Leisure Battery Current  
Display Page:

This page displays the amount of current 
being drawn from the Leisure Battery, 
when the Leisure Battery is being 
charged a lightning icon is displayed 
inside the battery symbol. A higher 
current draw will drain the battery faster.

Load Current Display Page:

This page displays the amount of current 
that is being used by the leisure vehicle 
to power its internal systems, such as 
lights, pumps and sockets for example.

NOTE: See the “Notifications” section in 
the User Settings to enable/disable the 
high and low voltage notifications for 
the Leisure Battery

NOTE: See the “Notifications” section 
in the User Settings to enable/
disable the high Leisure Battery load 
notifications

NOTE: The Load current and  
Battery current values may be 
different if the battery is also being 
charged by a 230V connection or a 
solar panel. See the “Notifications” 
section in the User Settings to 
enable/disable the High Load 
notification.

Summary of Contents for 2022

















































































































































































































Reviews:

No comments