manualshive.com logo in svg

Coachman 2022, Owner'S Handbook Manual, Page: 153 / 208

Share
Download
Coachman 2022 Owner'S Handbook Manual Download Page 153

•  Use for purposes other than those 

described in the operating manual.

Scope of delivery

• Safe

•  Installation and operating manual  

(on request).

Technical description

The control panel has a display and a key 
pad for entering the code. A master code 
is available for opening in an emergency.

The model can be identified from the type 
plate.

Control elements

No. in 

fig.1

Description

1

Display

2

Number keys

3

CLOSE button 

Closes the safe lock after code 

is entered

4

CLEAR button  

Cancels the code entered

5

Lock for master key (behind 

cover)

6

Locking mechanism cover

Using the safe

Closing the safe

  Enter a four digit code.

  Press the 

CLOSE button.

✓  The display shows the message 

CLOSED.

Opening the safe

  Enter the correct four digit code.

✓  The code entered is shown in the 

display.

✓ The safe will open.

✓ The display shows the message 

OPEN.

Care of your caravan

152

www.coachman.co.uk

O

w

ners h

andb

o

ok 

2

02

2

Coachman Caravan Company Limited, Amsterdam Road, Sutton Fields Industrial Estate, Hull, HU7 0XF

     Warning

•  This device can be used by children 

aged 8 years or over, as well as by 
persons with diminished physical, 
sensory or mental capacities or a 
lack of experience and knowledge, 
providing they are supervised,  
or have been taught how to use  
the device safely and are aware of  
the resulting risks.

• Only use the product as intended.
•  Do not make any modifications or 

alterations to the product.

NOTICE:
•  No unauthorised persons should have 

access to the master code. 

ºC

SET

!

!

Summary of Contents for 2022

















































































































































































































Reviews:

No comments