Caravan equipment
135
O
w
ners h
andb
o
ok
2
02
2
Make sure you always close the blade
completely after use.
Flushing the toilet
Press the flush button once to activate the
control panel. Then press the flush button
for several seconds to flush the toilet.
Level indication
You can check whether your waste
holding tank has a 1 level or a 3 level
indication. Make sure the tank is empty
and place it back properly. The activates
the control panel. If no level indication
light lights up, you toilet has a 1 level
indication. It will only indicate a full tank.
If a green level indication light immediately
lights up, you toilet has a 3-level indication.
It will show empty half full and full.
Emptying Tank
Waste-Holding Tank
When the red light to the level indicator
on the control panel lights up, you need to
empty the waste-holding tank. Remove the
tank via the service door. Then take it to an
authorised waste disposal point. Empty the
waste holding tank via the pour out spout.
To empty the tank without splashing,
press and hold the vent button with
your thumb while the pour out spout
is pointing downwards.
If you want to continue using your toilet
after emptying, prepare the waste-holding
tank gain.
Aqua Kem Green, Aqua Kem Natural and
Aqua Rinse (Test ISO-11734) are absolutely
safe to empty into a septic tank or small
biological systems on camping sites.
Please avoid to traveling with
anything in the a waste tank
Flush Water Tank
The flush water tank has a capacity of
8L. Only empty the flush water tank
completely if you don’t expect to use your
toilet for a long time (winter) period.
Place a sufficiently large bowl under the
drain tube and catch the remaining water.
Empty this bowl at an authorised waste
disposal point.
See Thetford quick guide diagrams for
visual reference.
Warning
Ordinary toilet paper can cause
clogging. Use Aqua Soft toilet paper
instead. This toilet paper is super-soft,
dissolves quickly, prevents clogging
and makes it easier to empty the waste
holding tank.
ºC
SET
!
!
ºC
SET
!
!