manualshive.com logo in svg

Coachman 2022, Owner'S Handbook Manual, Page: 126 / 208

Share
Download
Coachman 2022 Owner'S Handbook Manual Download Page 126

Caravan equipment

125

O

w

ners h

andb

o

ok 

2

02

2

Microwave oven

All our caravans are fitted with a 
microwave oven, for usage instructions 
please refer to the Manufacturers 
Operation Manual and Cookbook.  We 
would however draw your attention to 
the following important safety instruction 
and information.

Important safety instructions

Please read carefully and keep for  
future reference.

Microwave Oven Use:

•  The oven is for domestic food use only.

•  Never operate the oven when empty.

•  Do not leave or store anything inside 

the oven when not in use.

•  Never attempt to use the oven with the 

door open. It is important not to force 
or tamper with the door safety latches.

•  Never operate the oven with any  

object caught in the door.

•  Do not insert fingers or objects in the 

holes of the door latches or air-vent 
openings as this may damage the oven  
and cause an electric shock.

•  If water or food drops inside the air 

vent openings switch off the oven 
immediately, unplug it and call an 
approved service facility.

How your microwave  

oven works

Microwaves are energy waves, similar to 
those used for TV and radio signals. 

Electrical energy is converted into 
microwave energy, which is directed 
into the oven cavity via a waveguide. 
To prevent food and grease entering 
the waveguide it is protected by the 
waveguide cover.

Microwaves cannot pass through 
metal, because of this the oven cavity is 
made of metal and there is a fine metal 
mesh on the door.  During cooking the 
microwaves bounce off the sides of the 
oven cavity at random.

     Warning

Never allow children to use the 
microwave oven without adult 
supervision.

ºC

SET

!

!

     Warning

Liquids and other foods must not be 
heated in sealed containers since they 
are liable to explode. Microwave heating 
of beverages can result in delayed 
eruptive boiling, therefore care has to be 
taken when handling the container.  
Stir the liquid prior to and during heating/
reheating, let liquid stand for at least 20 
seconds in the oven after cooking.

ºC

SET

!

!

     Warning

If smoke is observed, switch off and 
unplug the appliance and keep the door 
closed in order to stifle any flames.

ºC

SET

!

!

Summary of Contents for 2022

















































































































































































































Reviews:

No comments