manualshive.com logo in svg

Coachman 2022, Owner'S Handbook Manual, Page: 174 / 208

Share
Download
Coachman 2022 Owner'S Handbook Manual Download Page 174

Ser vicing/Warrant y

173

O

w

ners h

andb

o

ok 

2

02

2

3. Refrigerator
4.  Distribution unit
5.  Charging Unit
6.  Junction box
7.  Wiring and supports
8.  Trailer connecting plugs
9.  Overall tests ext. lights
10. Awning light
11. Electronic ignition (hob)
12. 12V/230V system where applicable

Section (E) Gas Installation

1.  Hob burners
2. Oven
3. Heater
4. Fridge
5.  Water heating
6.  Fully operational
7.  Leak tested

Section (F) Final

Road Test

Service & Warranty

You are now the owner of a Coachman 
caravan. The User’s Guide has been 
prepared for your guidance to help you 
derive the greatest amount of pleasure 
from the use of your caravan. It is 
recommended that you read the pages of 
this guide thoroughly so that you are fully 
conversant with all the caravan systems. 
The major proprietary components of 
the caravan such as the chassis, heater, 
oven, water heater, refrigerator and 
electrical control systems all have their 
own comprehensive operating instructions 
which should be supplied with your 
caravan. It is strongly recommended that 
you read these too as it is not possible to 
include all the information they contain in 
this handbook.

Care Warranty

Your caravan is covered by a 3 year 
warranty. To activate this warranty your 
selling dealer must complete with you the 
online registration at the time of collection. 
It is a condition of this warranty that a 

service and safety check is carried out by 
your caravan dealer at least once every 
year as per the service schedule (page 178) 
in accordance with the National Caravan 
Council recommendations. 

If you have a  

“Warranty” problem

We sincerely hope you will never have 
cause to complain about your caravan. 
However, if things do go wrong, the course 
of action for you is to contact your dealer 
and explain the difficulty you are having. 
We are confident they will do their utmost 
to resolve the problem to your complete 
satisfaction.

The dealer from whom the caravan is 
purchased is liable for warranty repairs.

Any other approved dealers may carry 
out work on a caravan at their own 
convenience or discretion, but is not 
obliged to do this.

Your caravan is supplied to you with a 
manufacturer’s warranty guarantee that is 
valid for 3 years from the date of purchase 

Summary of Contents for 2022

















































































































































































































Reviews:

No comments