manualshive.com logo in svg

Coachman 2022, Owner'S Handbook Manual, Page: 71 / 208

Share
Download
Coachman 2022 Owner'S Handbook Manual Download Page 71

Refrigerator operation

70

www.coachman.co.uk

O

w

ners h

andb

o

ok 

2

02

2

Coachman Caravan Company Limited, Amsterdam Road, Sutton Fields Industrial Estate, Hull, HU7 0XF

unit and the connected ventilation 
ducts must be checked by authorised 
technical personnel after first use and 
after every other year for compliance with 
the European Standard EN 1949. A test 
certificate has to be issued. 

It is the user’s 

responsibility to arrange this test. 

•  

The gas burner must be inspected  
and  cleaned as necessary at least 
once a year. When using liquefied 
petroleum gas (tank or refill 
cylinders) the maintenance interval 
is reduced to half-yearly or quarterly.

   Keep the evidence of maintenance 

work carried out on your refrigerator.

•  

Work on gas and electrical 
equipment shall be carried out by 
qualified personnel only. 

It is recommended that this is carried  
out by an authorised customer  
services department.

We recommend maintenance following 
an extended shut-down of the vehicle. 
Please contact our customer services.

Summary of Contents for 2022

















































































































































































































Reviews:

No comments