Coachman 2022 Page 96 Owner'S Handbook Manual Download

Page: 96 / 208

Refrigerator operation

ners h

andb

Component RMD10.5T

and RMD10.5XT

Description

Tray

Vegetable compartment

Type plate (behind the vegetable
compartment)

Shelf

Thawed water drain

Evaporator for cold storage

Control elements
A: RMD10.5T and RMD10.5XT
B: RMD10.5 and RMD10.5X

Ice compartment

Menu navigation and operation

Press the control knob to activate the
TFT display.

The main menu is divided into three lines:

Main menu Details menu

Cooling capacity menu

Operating mode menu

Settings menu

• Turn the control knob to select the

desired detail menu.

• Press the control knob to open the

selected detail menu.

• Turn/press the control knob to navigate

through the detail menu and find settings.

Selected settings are displayed in blue.

• Confirm the selection with

This will return you to the main menu.

Setting the dimming function

The TFT display has a dimming function.
After 30 seconds, the brightness of the
display is reduced to the set level.

Select the setup menu

•   Select
•  Set the required brightness level.
•  Confirm the setting with

Activating/deactivating the
frame heater

The refrigerator has a frame heater
in the area of the display to reduce
condensation.

Summary of Contents for 2022

















































































































































































































Search results

Summary of Contents for 2022

Reviews:

Related manuals for 2022

Brands by name

Popular brands

Coachman 2022, Owner'S Handbook Manual

Search results

Summary of Contents for 2022

Reviews:

Related manuals for 2022

Brands by name

Popular brands