manualshive.com logo in svg

Coachman 2022, Owner'S Handbook Manual, Page: 62 / 208

Share
Download
Coachman 2022 Owner'S Handbook Manual Download Page 62

Connecting ser vices - Control panel

61

O

w

ners h

andb

o

ok 

2

02

2

Mains Removed:

Pressing the     button enables/ 
disables the Mains Removed notification. 
Disabling this will no longer inform  
the user when the mains have  
been removed.

Engine Running:

Pressing the     button enables/disables 
the Engine Running notification. 
Disabling this will no longer inform the 
user when ignition signal is present 
(Engine Running). 

Comms Fault:

Pressing the     button enables/disables 
the Comms Fault notification. Disabling 
this will no longer inform the user when 
there are communication faults between 
the control panel and other products 
communicating over the LIN network.

Firmware:

The Firmware option does not have  
any settings as it just displays the 
current version of Firmware that is 
installed onto the control panel.

Save and Exit:

Selecting this option will save any  
changed settings and then go back to  
the user settings page in the main menu.

NOTE: Some settings/options may be 
unavailable on selected models.

Summary of Contents for 2022

















































































































































































































Reviews:

No comments