manualshive.com logo in svg

Coachman 2022, Owner'S Handbook Manual, Page: 53 / 208

Share
Download
Coachman 2022 Owner'S Handbook Manual Download Page 53

Connecting ser vices - Electricit y

52

www.coachman.co.uk

O

w

ners h

andb

o

ok 

2

02

2

Coachman Caravan Company Limited, Amsterdam Road, Sutton Fields Industrial Estate, Hull, HU7 0XF

way of making sure equipment is safe is 
to unplug it.

There are several; proprietary makes of 
equipment to check the polarity of mains 
supply. This equipment is useful, mostly 
for mains connection when overseas.

If reverse polarity occurs on site then 
reverse the live and neutral connections 
inside the plug on your mains cable. This 
must be done by a qualified electrician. 
Ensure that the cable is re-connected 
to its original configuration on return to 
the UK.

If it can be achieved, it is preferable to 
connect live to live, and neutral to neutral 
to maintain full electrical protection.

Battery box

Located in the battery box below the 
mains inlet your caravan will be fitted 
with an aerial and satellite connection if 
an external source is available.

     Warning

Always use battery tray provided. 

When using a battery with a vent 
kit, leave the vent tube in the battery 
tray. Ventilation is provided through 
the battery box door when the door is 
closed at the top and bottom. 

ºC

SET

!

!

     Warning

Do not smoke – explosive gases  
may be present at the battery.  
Prevent flames and sparks in that 
area.  Switch off all appliances and 
lamps before disconnecting the 
auxiliary battery.

ºC

SET

!

!

     Warning

Any replacement of an auxiliary 
battery shall be of the same type and 
specification as that originally fitted 
or as specified by the manufacturer.

ºC

SET

!

!

     Warning

Batteries should be tested regularly 
to ensure reliability and safety. 
Should a fault develop the charger 
will continue to try to charge 
the battery leading to possible 
overheating and failure. If in doubt 
have it checked by your supplier.

ºC

SET

!

!

Summary of Contents for 2022

















































































































































































































Reviews:

No comments