manualshive.com logo in svg

Coachman 2022, Owner'S Handbook Manual, Page: 25 / 208

Share
Download
Coachman 2022 Owner'S Handbook Manual Download Page 25

Preparing for the road

24

www.coachman.co.uk

O

w

ners h

andb

o

ok 

2

02

2

Coachman Caravan Company Limited, Amsterdam Road, Sutton Fields Industrial Estate, Hull, HU7 0XF

Hitching up

Wind up the corner steadies to the fully 
retracted position.

Wind up the jockey wheel to raise the 
hitch to the above height of the towing 
vehicle ball. Remove ball cover.

(It is an advantage to have a person 
standing by the caravan to direct the 
driver of the towing vehicle to place the 
vehicle in the correct position).

Reverse the towing vehicle so that the 

towing ball is just under the  
caravan hitch.

Operating Instructions – AKS 3004

The AKS 3004 stabiliser fitted to your 
caravan has 4 special friction pads, 
which suppress both snaking and 
pitching and it is essential that the 
tow ball is kept completely clean as 
contaminated pads will reduce  
its effectiveness.

The maximum vertical static load for 
this coupling is 100kg and must not be 

exceeded.  However, the vertical static 
load on the towing vehicle may be less 
than this (check with towing vehicle 
manufacturer). Whichever is the least 
must not be exceeded.

Summary of Contents for 2022

















































































































































































































Reviews:

No comments