manualshive.com logo in svg

Coachman 2022, Owner'S Handbook Manual, Page: 67 / 208

Share
Download
Coachman 2022 Owner'S Handbook Manual Download Page 67

Caravan equipment

66

www.coachman.co.uk

O

w

ners h

andb

o

ok 

2

02

2

Coachman Caravan Company Limited, Amsterdam Road, Sutton Fields Industrial Estate, Hull, HU7 0XF

full. Hot water is heated to greater 
than 50°C. NB: If Circulation Pump is 
set to Continuous, this option will not  
be available.

3.  Hot Water Boost. Volume bar full. 

Central heating circulation is disabled 
for 30 mins. Hot water is heated to 
greater than 65°C. After 30 mins the 
system reverts to Hot Water Normal.

4.  Adjust by pressing Plus or Minus button.

Electric Heating

Check that 230V supply is displayed on 
the Standby Screen. The Alde boiler is 
programmed to use power economically 
and there are times when it may use no 
power at all, even if set to 3kW.

1.  Select Off, 1, 2 or 3 kW electric 

heating. More power equals better 
performance, but may be restricted by 
the current (amps) limit on the electric 
hook-up.

2.  Adjust by pressing Plus or Minus button.

Max current draw from 230V supply is 

4.5A on 1kW, 9A on 2kW, 14A on 3kW. If 
the electric supply has unstable voltage, 
the amperage will also fluctuate.

 

Gas Heating

The Alde boiler is programmed to use  
power economically. The gas burner has 
two stages, shifting dynamically between 
low or full flame. There are times when 
it may use no power at all, even if gas 
heating is selected.

1.  Press the Flame button to select gas 

heating. Green is on, blue is off.

Use both gas and electric heating  
for best performance.

Shutting down the system

To save energy, the control panel 
only updates the boiler after the last 
adjustment is made. Wait 10 secs before 
shutting down the system to ensure the 
boiler is updated.

1.  Press the Power button again. The 

screen goes dark, the green LED is 
unlit. The system is off.

Setup

Most UK installations do not need setting 
up in the Settings Menu, and use default 
factory settings.

Restore default factory settings

Before using the system for the first time, 
restore default factory settings. Your 
control panel may have been tested by 
the dealer or installer, and some settings 
may have been changed.

1.  Press Tool button to access the 

Settings Menu (bottom right in  
Main Menu).

2.  Press down arrow, until Reset button  

is displayed.

3.  Press the Reset button to proceed.

Summary of Contents for 2022

















































































































































































































Reviews:

No comments