manualshive.com logo in svg

Coachman 2022, Owner'S Handbook Manual, Page: 17 / 208

Share
Download
Coachman 2022 Owner'S Handbook Manual Download Page 17

available. The user can then choose any 
options up to this limit.

In either case this mass shall be added  
to the user payload.

 

Nose weight

The part of the weight of the caravan 
supported by the rear of the  
towing vehicle.

When measuring the nose weight, it is 
important that the caravan is loaded 
and level. Do not place extra items 

indiscriminately into the caravan after  
this adjustment has been made.

The caravan is intended to be towed 
slightly nose heavy. The nose weight can 
be adjusted by distribution of the load 
within the caravan. You must not exceed 
the maximum nose weight rating of the 
hitch head, which is usually a maximum 
of 100kg (please refer to the detailed 
vehicle specifications), or that of the 
towing vehicle as stated in the towing 
vehicle’s manufacturer’s handbook.  
The caravan’s nose weight should be as 
high as practical; taking into account  
the towing vehicle and caravan nose 
weight limits.

Towing vehicle terms

Kerb weight: 
The weight of the towing vehicle as 
defined by the vehicle manufacturer.

The Caravan and Towing Vehicle  
Weight Ratio

This can be determined by calculation 
and is equal to:

actual laden mass of caravan

kerb weight of towing vehicle x 100%

Towing code

16

www.coachman.co.uk

O

w

ners h

andb

o

ok 

2

02

2

Coachman Caravan Company Limited, Amsterdam Road, Sutton Fields Industrial Estate, Hull, HU7 0XF

The mass of optional equipment 
only includes equipment that is 
fitted in the factory by the caravan 
manufacturer. It does not include the 
mass of any equipment that is fitted 
to the caravan by the dealership or 
any other party.  
The weight of any equipment  
fitted after the caravan has left  
the manufacturer forms  
part of the User Payload.

Yes

Maybe

No

Summary of Contents for 2022

















































































































































































































Reviews:

No comments