Club Car XRT 950 2009, Maintenance And Service Manual

Page: 43 / 256

BODY AND TRIM Rear Fender
4
1040
Figure 4-35 Under Seat Center Panel Removal
1041
Figure 4-36 Under Seat Center Panel Removed From
Vehicle
UNDER SEAT CENTER PANEL INSTALLATION
1. Install under seat center panel in the reverse order of removal. Tighten bolts to 22 in-lb (2.5 N·m).
REAR FENDER
See General Warning on page 1-2.
REAR FENDER REMOVAL
1. Raise the cargo bed and engage the cargo bed lock pin located at the driver side cargo bed hinge (Figure
4-37, Page 4-19) .
2. Remove the four bolts that secure the fender to the underside of the cargo bed (Figure 4-38, Page 4-19) .
1
2
1. Locking Pin 2. Bed Locking Pin Holes
K-00221
Figure 4-37 Bed Locking Pin
1154
Figure 4-38 Rear Fender Removal
3. Remove fender from vehicle.
2009-2012 XRT 950 Maintenance and Service Manual Page 4-19