BODY AND TRIM
Front Body Repair
4
SMALL SCRATCHES THAT CANNOT BE BUFFED OUT
1.
Thoroughly clean the affected area and then dry.
2.
Using 240 grit or finer sandpaper, lightly sand scratch to feather edges. Finish sand scratch with 320 grit or finer
paper to remove gloss from surface. Sand as little body surface as possible beyond scratch.
See following
CAUTION.
CAUTION
• Be careful not to sand completely through the finish to the body material. If the finish is sanded
through and the thermo plastic olefin (TPO) body material is exposed, refer to Gouges, Punctures,
Tears, Large Scratches, and Abrasions on page 4-3.
3.
Using the brush provided with the touch-up paint (available from Club Car Service Parts, see following color
chart), apply paint to the scratch. Multiple layers of paint may be required to fill the scratch.
4.
Allow paint to dry completely (approximately 10-20 minutes), then lightly buff the imperfection.
5.
Apply wax to the entire body part to restore luster and weather protection.
TOUCH-UP PAINT COLOR CHART
COLOR
CCI P/N
Beige
101997201
White
101997202
Red
101997203
Gray
101997204
Dark Gray
101997205
Royal Blue (Pacific Blue)
101997206
Black
101997207
Dark Green
101997209
Classic Blue (Navy)
101997211
Burgundy
101997212
GOUGES, PUNCTURES, TEARS, LARGE SCRATCHES, AND ABRASIONS
Touch-up is not recommended. Replace the entire body part or have it repaired by a professional paint and body repair
shop with experience repairing TPO bodies.
2009-2012 XRT 950 Maintenance and Service Manual
Page 4-3
