Club Car XRT 950 2009, Maintenance And Service Manual

Page: 223 / 256

TRANSAXLE AND HALFSHAFTS Transaxle Removal
17
17. Remove the lock nuts and bolts that secure the subframe to the chassis mounting straps (Figure 17-18, Page
17-5) .
1292
Figure 17-16 Place Floor Jack Under Transaxle and
Subframe
1290
Figure 17-17 Loosen Front Subframe Hardware
1085
Figure 17-18 Remove Rear Subframe Hardware
1095
Figure 17-19 Lower Subframe With Floorjack
18. Carefully lower the subframe to the floor (Figure 17-19, Page 17-5) .
19. Use a pry bar to disconnect the halfshafts from the transaxle (Figure 17-20, Page 17-5) and (Figure 17-21,
Page 17-5) .
1105
Figure 17-20 Disconnect Halfshaft – Driver Side
1097
Figure 17-21 Disconnect Halfshaft – Passenger Side
20. Remove the transaxle mounting hardware that was previously loosened.
2009-2012 XRT 950 Maintenance and Service Manual Page 17-5