Cisco ONS 15454 SDH, Procedure Manual

Page: 629 / 860

19-31
Cisco ONS 15454 SDH Procedure Guide, R7.0
78-17194-01
Chapter 19 DLPs D200 to D299
DLP- D234 Roll the Source or Destination of One Optical Circuit
Figure 19-5 Selecting Single Roll Attributes
Step 6
Click Next .
Step 7 In the Pivot/Fixed Point 1 window, click the square in the graphic image that represents the facility that
you want to keep (
Figure 19-6 ).
This facility is the fixed location in the cross-connect involved in the roll process. The identifier appears
in the text box below the graphic image.
The facility that is not selected is the Roll From path. The
Roll From path is deleted after the roll is completed.
Figure 19-6 Selecting a Path
Step 8
Click Next .
Step 9 In the Select New End Point area, choose the Slot , Port , and VC4 from the drop-down lists to select the
Roll To facility ( Figure 19-7 ).
HOP
HOP
VC4-*
VC4-*
VC4-*
VC4-*
VC4-*
VC4-*
HOP
VC4-*
134351