Cisco ONS 15454 SDH, Procedure Manual

Page: 267 / 860

6-93
Cisco ONS 15454 SDH Procedure Guide, R7.0
78-17194-01
Chapter 6 Create Circuits and Low-Order Tunnels
NTP- D241 Provision G-Series Ports for Transponder Mode
Note In this step, “Port A” represents the first port in a pair and “Port B” the second port in the pair.
You can pair any two ports on a G-Series card in two-port bidirectional mode.
a.
Click the Port A row (for example, Port 1).
b.
In the TXP Port column, choose the port number that reflects Port A (for example, Port 1).
c. In the TXP Mode column, choose TX/RX from the drop-down list.
d.
Click a Port B row (for example, Port 2).
e. In the TXP Port column, choose Port A (for example, Port 1) from the drop-down list.
f.
In the TXP Mode column, choose TX/RX from the drop-down list.
g.
Click Apply .
The ports in card view have arrows and a connecting line between the back of the ports.
Figure 6-10 Two Port Bidirectional Transponder Mode
Step 5
To put a G-Series card port in one-port bidirectional transponder mode ( Figure 6-11 ):
a. Click the desired port row (for example, Port 1).
b.
In the TXP Port column, choose the desired port from the drop-down list (for example, Port 1).
c.
In the TXP Mode column, choose TX/RX from the drop-down list.
d.
Click Apply .
In card view, the desired port has arrows and a curved line on the back of the port.