manualshive.com logo in svg

Cisco ONS 15454 SDH, Procedure Manual

The Cisco ONS 15454 SDH is a reliable and efficient product for optical networking. Ensure smooth operations by following the step-by-step instructions outlined in our comprehensive Procedure Manual. Access the manual for free and download it from manualshive.com, your go-to resource for all your user manual needs.

Share
Download
background image

9-6

Cisco ONS 15454 SDH Procedure Guide, R7.0

78-17194-01

Chapter 9      Manage Alarms

NTP- D71 Create, Download, and Assign Alarm Severity Profiles

To return to the node menu from the Slot screen, press 

Slot

 until you cycle through all the slots and see 

“Node.”

If you do not press any buttons, the LCD display will return to its default display with the node name. 
However, if you did not cycle through the options to return to the node status, you will see the slot or 
port where you last checked status.

Stop. You have completed this procedure.

NTP-D71 Create, Download, and Assign Alarm Severity Profiles

Step 1

Complete the 

“DLP-D60 Log into CTC” task on page 17-49

 at the node where you want to create an 

alarm profile. If you are already logged in, go to 

Step 2

 to create, clone or modify an alarm profile, or 

continue with 

Step 3

 to download an alarm profile.

Step 2

Complete the 

“DLP-D425 Create a New or Cloned Alarm Severity Profile” task on page 21-6

. This task 

clones a current alarm profile, renames the profile, and customizes the new profile.

Step 3

Complete the 

“DLP-D223 Download an Alarm Severity Profile” task on page 19-22

. This task 

downloads an alarm severity profile from a CD or a node.

Note

After storing a created or downloaded alarm profile, you must go to the node (either by logging 
into it or clicking on it from the network view) and activate the profile by applying it to the shelf, 
one or more cards, or one or more ports. 

Step 4

As necessary, complete the 

“DLP-D426 Apply Alarm Profiles to Ports” task on page 21-9

 or the 

“DLP-D117 Apply Alarm Profiles to Cards and Nodes” task on page 18-18

.

Step 5

As necessary, complete the 

“DLP-D427 Delete Alarm Severity Profiles” task on page 21-11

.

Stop. You have completed this procedure.

Purpose

This procedure creates a customized alarm profile at the network, node, or 
card level.

Tools/Equipment

None

Prerequisite Procedures

None

Required/As Needed

As needed

Onsite/Remote

Onsite or remote

Security Level

Provisioning or higher

Summary of Contents for ONS 15454 SDH





























































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ONS 15454 SDH

TC Electronic M300 Service Manual preview
M300
Brand: TC Electronic Pages: 2
Magnat Audio MC 200 Faq preview
MC 200
Brand: Magnat Audio Pages: 2
Yamaha EMP100 Supplementary Manual preview
EMP100
Brand: Yamaha Pages: 4
Magma PE6R4-I Quick Installation Manual preview
PE6R4-I
Brand: Magma Pages: 2
Magnadyne RV2458 User Manual preview
RV2458
Brand: Magnadyne Pages: 13
Rane CP 31 Datasheet preview
CP 31
Brand: Rane Pages: 4
DAQ system PCIe-FRM13 User Manual preview
PCIe-FRM13
Brand: DAQ system Pages: 41
DAQ system PCIe-SER01 User Manual preview
PCIe-SER01
Brand: DAQ system Pages: 19
Maxim MAX1415 Specification Sheet preview
MAX1415
Brand: Maxim Pages: 14
Supermicro SAS-827HD User Manual preview
SAS-827HD
Brand: Supermicro Pages: 16
Justec JDR454WV4 User Manual preview
JDR454WV4
Brand: Justec Pages: 61
Longshine LCS-8131G3 User Manual preview
LCS-8131G3
Brand: Longshine Pages: 27
Paxton Net2Air Ins-40085-US Quick Start Manual preview
Net2Air Ins-40085-US
Brand: Paxton Pages: 4
ZyXEL Communications GS3700 Series Handbook preview
GS3700 Series
Brand: ZyXEL Communications Pages: 215
Buffalo LinkStation Mini User Manual preview
LinkStation Mini
Brand: Buffalo Pages: 71
Dataprobe iBoot-Exp Manual preview
iBoot-Exp
Brand: Dataprobe Pages: 5
KonNad SinoCon C2000-C2-SHK0401-BB1 User Manual preview
SinoCon C2000-C2-SHK0401-BB1
Brand: KonNad Pages: 12
Avenview DVI-PROWALL-9X Instruction Manual preview
DVI-PROWALL-9X
Brand: Avenview Pages: 28

Brands by name

Popular brands

Load more brands