Figure 34. Configurator (Advanced Radio Settings)
Using the FluidMAX Management Setting
The
FluidMAX™ Management
controls are used to set the unit's
FluidMAX™ operating mode.
Note that the
FluidMAX™ Management
controls are only available under
the following conditions:
• If the unit's firmware is equipped with the FluidMAX engine.
• If the unit is currently being operated as part of a point-to-multipoint
network topology.
To use the FluidMAX Management menu, do the following steps:
1.
Click the
Radio Mode
drop-down menu.
2.
Choose the correct FluidMAX operating mode from the following
list of options:
•
AUTO:
The FluidMAX engine is enabled, and the unit role
is set automatically. Depending on various factors, the unit
will automatically choose whether to transmit using the
time-division multiple access (TDMA) protocol or the
carrier-sense multiple access (CSMA) protocol.
Device configuration using the configurator interface
© 2021 Cisco and/or its affiliates. All rights reserved.
Page 93 of 175
