NOTE
When the
General Mode
window is opened for the first time,
the
Local IP
and
Local Netmask
LAN parameters will be
factory-set default values.
The information needed is self-explanatory. To enter a parameter, click the
field and type the parameter.
If needed, enter the local primary DNS address in the
Dns 1
field, and
enter the local secondary DNS address in the
Dns 2
field.
Save the LAN settings by clicking the
Save
button. Alternatively, clear the
settings by clicking the
Reset
button.
7.4.2. Wireless settings
Modifying the wireless settings
IMPORTANT
If the Cisco FM1200 Volo was purchased in the USA or
Canada, the Country selection is set to the country of
purchase, and the
Country:
drop-down will be disabled.
The
WIRELESS RADIO
window contains controls to change the following
settings:
• The shared network passphrase.
• The national territory in which the wireless network is installed.
• The operational radio frequency and bandwidth settings.
To change the Wireless Settings, do the following steps:
1.
Click the
-wireless radio
link under
GENERAL SETTINGS
in the
left-hand settings menu.
• The
WIRELESS RADIO
dialog will be shown (
).
Device configuration using the configurator interface
© 2021 Cisco and/or its affiliates. All rights reserved.
Page 63 of 175
