4.
To show the password as it is being typed, check the
Show
Password
check-box.
5.
Save the Viewmode Credentials settings by clicking the
Change
button. Alternatively, clear the settings by clicking the
Reset
button.
To change the View Mode settings, do the following steps:
1.
Log in to the unit's Configurator GUI with Administrator
credentials. See
“Accessing the Cisco FM1200 Volo for device
2.
Click the
-view mode settings
link under
MANAGEMENT
SETTINGS
in the left-hand settings menu (
).
Figure 53. Configurator GUI (VIEW MODE SETTINGS dialog)
• The
VIEW MODE SETTINGS
dialog will be shown.
3.
To allow or prohibit access to any device-configuration settings,
click the relevant drop-down, and click the
Disabled
or
Enabled
setting:
• If the
Disabled
option is selected for a device-configuration
setting, the setting for that category will be visible but not
accessible to ordinary users.
• If the
Enabled
option is selected for a device-configuration
setting, the setting can be modified by ordinary users.
Device configuration using the configurator interface
© 2021 Cisco and/or its affiliates. All rights reserved.
Page 125 of 175
