Cisco Cisco ONS 15600 SDH, Troubleshooting Manual

Page: 304 / 318

4-48
Cisco ONS 15600 SDH Troubleshooting Guide, R8.0
July 2010
Chapter 4 Error Messages
EID-6248 The cost must between 1 and 15. Refer to the error message text.
EID-6249 The port has a cross-connect. Refer to the error message text.
EID-6250 The reversion time is invalid. The reversion time is invalid. Enter again.
EID-6251 Invalid Margin For Span Aging.
Value is not in the range 0 - 10.
Enter a value between 0 and 10.
EID-6252 The data cannot be retrieved because ANS parameters cannot
be calculated on the node in its current configuration. Refer to the error message text.
EID-6253 Invalid Margin For Span Aging. Refer to the error message text.
EID-6254 SDH mode does not support timing references. Timing reference is not supported by SDH
mode.
EID-6255 Only DS1 interfaces with ESF line types support timing
references. Refer to the error message text.
EID-6256 sendDoNotUse and sendDoNotUseFF are mutually exclusive. Refer to the error message text.
EID-6257 The termination is already in use. Refer to the error message text.
EID-6258 The side is carrying services or traffic. Refer to the error message text.
EID-6259 A pluggable module on Port 22 remains unmanaged. Refer to the error message text.
EID-6260 You cannot delete this port.
There was a severe architectural error related to the index of the
pluggable trunk port object.
Please contact technical support for assistance.
Refer to the error message text.
EID-6261 This is not a valid VLAN ID. The VLAN database is empty. The user adds a row without a valid VLAN
database loaded.
EID-6263 The equipment requires two slots. The user provisions a double footprint card
in a single slot.
EID-6264 The patchcord is duplicated. Refer to the error message text.
EID-6265 The wavelength is in use by an OCH trail, a virtual link, or an
internal patchcord. Refer to the error message text.
EID-6266 The card cannot be changed because the port has not been
provisioned. Refer to the error message text.
EID-6267 Each port can have a maximum of 8 MAC addresses. Refer to the error message text.
EID-6268 This server trail does not have a valid start or end. Refer to the error message text.
EID-6269 The maximum number of server trails is 3743. Refer to the error message text.
EID-6270 A unique server trail ID could not be allocated. Refer to the error message text.
EID-6271 The server trail already exists. Refer to the error message text.
EID-6272 The server trail size must not exceed the port bandwidth. Refer to the error message text.
Table 4-1 Error Messages (continued)
Error Warning
ID
Error Warning Message Description