Cisco Cisco ONS 15600 SDH, Troubleshooting Manual

Page: 293 / 318

4-37
Cisco ONS 15600 SDH Troubleshooting Guide, R8.0
July 2010
Chapter 4 Error Messages
WID-5065 If you apply routing constraints to more than {0} nodes,
performance might be affected and the operation might require
more time than expected.
Select Yes if you intend to proceed in spite of this risk, or No if
you prefer to review your selection.
Refer to the warning message text.
WID-5066 The routing constraints will be lost.
Are you sure you want to reset your changes?
Refer to the warning message text.
WID-5067 The routing constraints will be lost.
Are you sure you want to leave this panel?
Refer to the warning message text.
EID-5068 The routing constraints could not be applied. Refer to the error message text.
EID-5069 A source node cannot be added to either of these lists. Select a node other than the source node to
add to the route.
EID-5070 A destination node cannot be added to either of these lists. Select a node other than the destination
node to add to the route.
EID-5071 This node already belongs to one of these lists. The node is already selected either in
include or exclude list in the OCH circuit.
EID-5072 An OCH-Trail tunnel link was found but without any associated
circuit. Create an OCH-Trail circuit associated with
the link.
EID-5073 You are creating an unprotected link from a protected port.
Do you want to continue?
Refer to the error message.
EID-5074 Deleting OCH DCN circuits will cause a loss of connectivity to
nodes in the circuit path that do not have other DCN
connections.
Do you want to continue?
Refer to the error message.
EID-5075 The VLAN ID must be a number between 1 and 4093. Enter a number between 1 and 4093.
EID-5076 An error occurred while provisioning the VLAN ID.
The VLAN ID is already present in the current profile
Select a VLAN ID that is not present in the
current profile.
EID-5077 An error occurred while provisioning the VLAN database
profile.
{0}
CTC could not save the VLAN profile to the
file name mentioned.
EID-5078 The VLAN merge is not complete.
You forgot to fill {0} record(s).
Fill in the number of records specified and
then proceed.
EID-5079 An error occurred while validating the provisionable patchcord. Refer to the error message text.
EID-5080 No rolls are available. You cannot delete a roll without selecting a
roll.
EID-5081 An error occurred while tracing the RPR ring:
{0}
The circuit reference is invalid.
Table 4-1 Error Messages (continued)
Error Warning
ID
Error Warning Message Description