Cisco Cisco ONS 15600 SDH, Troubleshooting Manual

Page: 288 / 318

4-32
Cisco ONS 15600 SDH Troubleshooting Guide, R8.0
July 2010
Chapter 4 Error Messages
EID-3402 The switch request could not be completed.
The {0} card is not present or is not responding.
Try again after ensuring that the {0} card is present and is not
resetting.
Refer to the error message text.
EID-3403 The administrative state transition has not been attempted on
the monitored port. Refer to the error message text.
EID-3404 The far end IP address could not be set on the {0} termination.
The IP address cannot be:
loopback (127.0.0.0/8)
class D (224.0.0.0/4)
class E (240.0.0.0/4)
broadcast (255.255.255.255/32)
internal {1}
Refer to the error message text.
EID-3405 You cannot change card parameters with port {0} in {1} state.
Click "Reset" to revert the changes. Refer to the error message text.
EID-4000 The {0} ring name cannot be changed now because a {0}
switch is active. You cannot change the ring name because a
switch of the same ring type is active.
EID-4001 The {0} node ID cannot be changed now because a {0} switch
is active. You cannot change the ring ID because a
switch of the same ring type is active.
WID-4002 CAUTION: Reverting to an earlier software release may result
in TRAFFIC LOSS and loss of connectivity to the node. It may
require onsite provisioning to recover.
If the node was running {0} before, reverting will restore the
{0} provisioning, losing any later provisioning. If the node was
running some other version, reverting will LOSE ALL
PROVISIONING.
{1}
{2}
Refer to the warning message text.
EID-4003 The Cisco IOS console is disabled for the card in Slot {0}. The card might not be a Cisco IOS-based
card or it may be rebooting.
EID-4004 An error occurred while canceling the software upgrade. CTC encountered an error while canceling
the software upgrade.
EID-4005 {0} encountered while performing a database backup. CTC encountered the specified error during
database backup.
EID-4006 The file {0} does not exist or cannot be read. Refer to error message.
EID-4007 The size of the file {0} is zero. The size of the file that is being backed up
or restored is zero.
WID-4008 A software upgrade is in progress.
{0} cannot proceed during a software upgrade.
Please try again after the software upgrade has completed.
The specified action cannot be performed
during a software upgrade. You must try
after the upgrade process is completed.
EID-4009 {0} encountered while restoring the database. CTC encountered the specified error while
restoring the database.
Table 4-1 Error Messages (continued)
Error Warning
ID
Error Warning Message Description