4-23
Cisco ONS 15600 SDH Troubleshooting Guide, R8.0
July 2010
Chapter 4 Error Messages
EID-3174
The description ''{0}'' cannot exceed {1} characters.
The specified location exceeds the specified
character limit.
EID-3175
The operator identifier ''{0}'' cannot exceed {1} characters.
The specified operator identifier exceeds
the specified character limit.
EID-3176
The operator specific information ''{0}'' cannot exceed {1}
characters.
The specified operator specific information
exceeds the specified character limit.
EID-3177
The node name cannot be empty.
The specified name is empty.
EID-3178
The node name ''{0}'' cannot exceed {1} characters.
The specified name exceeds the specified
character limit.
EID-3179
The protect card is in use.
Refer to the error message text.
EID-3180
The 1+1 protection group does not exist.
Create a 1+1 protection group.
EID-3181
The Y-cable protection group does not exist.
Refer to the error message text.
EID-3182
The topology element is in use and cannot be deleted as
requested.
You cannot delete the topology element
which is in use.
EID-3183
An error occurred while deleting the protection group.
CTC encountered an error while deleting
the protection group.
EID-3184
No {0} was selected.
You must select an item before completing
this task.
EID-3185
This ring has an active protection switch operation and cannot
be deleted at this time.
Refer to the error message text.
EID-3186
The node is busy: {0} is {1} and cannot be deleted as requested. The request cannot be completed.
EID-3187
An error occurred while deleting the trap destination.
CTC encountered an error deleting the trap
destination.
EID-3188
An error occurred during authentication. The password entered
is invalid.
The password you entered is invalid. Enter
the password again.
EID-3189
The sum of the {0} must be between {1} and {2}.
Refer to the error message text.
EID-3214
The number of high order circuits for the line could not be
retrieved.
The number of High Orders (STS/STM) for
the line is not available.
EID-3215
An error occurred while refreshing.
Used frequently in pane classes to indicate
a general error condition when trying to
refresh from the model.
EID-3216
The proxy port is invalid.
Refer to the error message text.
EID-3217
The statistics could not be refreshed.
CTC could not refresh statistics values.
EID-3218
The automatic node setup could not be launched.
Refer to the error message text.
EID-3219
The automatic node setup information could not be refreshed. Failure trying to retrieve automatic node
setup information.
EID-3220
An error occurred while refreshing row {0}.
Error refreshing the specified row.
EID-3222
The statistics could not be cleared.
Refer to the error message text.
Table 4-1
Error Messages (continued)
Error Warning
ID
Error Warning Message
Description
Summary of Contents for Cisco ONS 15600 SDH
