Cisco Cisco ONS 15600 SDH, Troubleshooting Manual

Page: 286 / 318

4-30
Cisco ONS 15600 SDH Troubleshooting Guide, R8.0
July 2010
Chapter 4 Error Messages
EID-3358 An optical link model does not exist for the specified interface. Create an optical link model for the
interface, and proceed.
EID-3359 Optical parameters could not be set for the node. Refer to the error message text.
EID-3360 ANS cannot be performed.
Please check {0} parameter value.
Refer to the error message text.
EID-3361 The ring termination is in use.
An error occurred while deleting the ring termination.
You cannot delete a ring in use.
EID-3362 An error occurred while deleting the ring termination. There was an error while deleting ring
termination.
EID-3363 No ring terminations were selected. You must select a ring termination.
EID-3364 An error occurred while creating the ring ID. There was an error while creating the ring
ID.
EID-3365 The OSC termination is in use. Select another optical service channel
(OSC) which is not in use.
EID-3366 The OSC termination could not be deleted. There was an error deleting the OSC
termination.
EID-3370 No optical link was selected. You must select an optical link.
EID-3371 An error occurred while calculating the automatic optical link
list. Refer to the error message text.
EID-3372 CTC attempted to access an OCHNC connection that has been
destroyed. CTC destroyed an external attempt to
access an optical channel network
connection.
EID-3375 The expected span loss must be set. Refer to the error message text.
EID-3376 The measured span loss could not be retrieved. Refer to the error message text.
EID-3377 The wrong interface was used. The interface used for the card is wrong.
EID-3378 This is a duplicate origination patchcord identifier. The provisionable patchcord identifier to
the patchcord you are attempting to
provision is already in use by another
patchcord on the origination node.
EID-3379 This is a duplicate termination patchcord identifier. The provisionable patchcord identifier to
the patchcord you are attempting to
provision is already in use by another
patchcord on the remote node.
EID-3380 The host cannot be found. Refer to the error message text.
EID-3381 The maximum frame size must be between {0} and {1} and
may be increased in increments of {2}. The frame size must be in the specified
range. This can incremented by the
specified value.
EID-3382 The number of credits must be between {0} and {1}. The number of credits must be between the
specified values.
Table 4-1 Error Messages (continued)
Error Warning
ID
Error Warning Message Description