Chrysler 300 2017 Owner'S Manual Download Page 395 | Manualshive

Page: 395 / 488

background image

least amount of accelerator pedal pressure that will main-
tain the rocking motion, without spinning the wheels or
racing the engine.

NOTE:

Shifts between DRIVE and REVERSE can only be

achieved at wheel speeds of 5 mph (8 km/h) or less.
Whenever the transmission remains in NEUTRAL for more
than two seconds, you must press the brake pedal to
engage DRIVE or REVERSE.

CAUTION!

Racing the engine or spinning the wheels may lead to
transmission overheating and failure. Allow the en-
gine to idle with the transmission in NEUTRAL for at
least one minute after every five rocking-motion
cycles. This will minimize overheating and reduce the
risk of transmission failure during prolonged efforts to
free a stuck vehicle.

NOTE:

Push the

⬙

ESC Off

⬙

switch, to place the Electronic

Stability Control (ESC) system in

⬙

Partial Off

⬙

mode, before

rocking the vehicle. Refer to “Electronic Brake Control” in
“Starting And Operating” for further information. Once
the vehicle has been freed, push the

⬙

ESC Off

⬙

switch again

to restore

⬙

ESC On

⬙

mode.

WARNING!

Fast spinning tires can be dangerous. Forces generated
by excessive wheel speeds may cause damage, or even
failure, of the axle and tires. A tire could explode and
injure someone. Do not spin your vehicle’s wheels
faster than 30 mph (48 km/h) or for longer than 30
seconds continuously without stopping when you are
stuck and do not let anyone near a spinning wheel, no
matter what the speed.

CAUTION!

•

When “rocking” a stuck vehicle by shifting between
DRIVE and REVERSE, do not spin the wheels faster
than 15 mph (24 km/h), or drivetrain damage may
result.

•

Revving the engine or spinning the wheels too fast
may lead to transmission overheating and failure. It
can also damage the tires. Do not spin the wheels
above 30 mph (48 km/h) while in gear (no transmis-
sion shifting occurring).

6

WHAT TO DO IN EMERGENCIES

393

«
...
393
394
395
396
397
...
»

Summary of Contents for 300 2017









































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 300 2017

Brand: Abarth Pages: 176

Brand: JETBAG Pages: 44

PRIME DESIGN VCR 326

Brand: Safe Fleet Pages: 16

Prime Design VBC PC11

Brand: Safe Fleet Pages: 8

Prime Design AR1418

Brand: Safe Fleet Pages: 4

FRONT HEADLIGHT LENS COVER

Brand: Bimmer Jakes Pages: 4

Brand: 3SIXT Pages: 12

Brand: Warrior Products Pages: 4

Brand: Mobile Create Pages: 15

Brand: Victory 4x4 Pages: 13

Brand: Velleman Pages: 6

Brand: Hudson Pages: 34

Sprinter Side Ladder

Brand: FVC Pages: 8

2005 JR41 Stratus

Brand: Dodge Pages: 293

Brand: Oypla Leisure Pages: 4

Brand: Honda Pages: 124

Brand: Oldsmobile Pages: 380

Brand: Prorack Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands