Chrysler 300 2017 Owner'S Manual Download Page 159 | Manualshive

Page: 159 / 488

background image

provides less reaction time than the “Far” setting, which
allows for a more dynamic driving experience.

NOTE:

•

The system will retain the last setting selected by the
driver after ignition shut down.

•

FCW may not react to irrelevant objects such as over-
head objects, ground reflections, objects not in the path
of the vehicle, stationary objects that are far away,
oncoming traffic, or leading vehicles with the same or
higher rate of speed.

•

FCW will be disabled like ACC, with the unavailable
screens.

FCW Limited Warning

If the instrument cluster display reads “ACC/FCW Lim-
ited Functionality” or “ACC/FCW Limited Functionality
Clean Front Windshield” momentarily, there may be a
condition that limits FCW functionality. Although the
vehicle is still drivable under normal conditions, the active
braking may not be fully available. Once the condition that
limited the system performance is no longer present, the
system will return to its full performance state. If the
problem persists, see your authorized dealer.

Service FCW Warning

If the system turns off, and the instrument cluster display
reads:

•

ACC/FCW Unavailable Service Required

•

Cruise/FCW Unavailable Service Required

This indicates there is an internal system fault. Although
the vehicle is still drivable under normal conditions, have
the system checked by an authorized dealer.

LANESENSE — IF EQUIPPED

LaneSense Operation

The LaneSense system is operational at speeds above
37 mph (60 km/h) and below 112 mph (180 km/h). The
LaneSense system uses a forward looking camera to detect
lane markings and measure vehicle position within the
lane boundaries.

When both lane markings are detected and the driver
unintentionally drifts out of the lane (no turn signal
applied), the LaneSense system provides a haptic warning
in the form of torque applied to the steering wheel to
prompt the driver to remain within the lane boundaries. If
the driver continues to unintentionally drift out of the lane,

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

157

«
...
157
158
159
160
161
...
»

Summary of Contents for 300 2017









































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 300 2017

Brand: Davis Instruments Pages: 16

Brand: cam Pages: 2

Brand: Dapper Lighting Pages: 2

Brand: Wagan Pages: 12

Reference Series

Brand: OEM Audio Pages: 29

V2 SUPERCHARGER

Brand: Tesla Pages: 9

Brand: Whispbar Pages: 16

Brand: Farad Pages: 8

Brand: CITROEN Pages: 52

Brand: Thule Pages: 8

Brand: Fast Master Products Pages: 13

Brand: Atera Pages: 3

Brand: Black Horse Pages: 5

Brand: TEINHOF Pages: 2

S90 - ACCESSORY PANEL

Brand: Volvo Pages: 166

Brand: BMW Pages: 64

Brand: Nav TV Pages: 8

Brand: Haltech Pages: 13

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands