Chrysler 300 2017 Owner'S Manual Download Page 385

Page: 385 / 488

Jack Location/Spare Tire Stowage

The jack and spare tire are both stowed under an access
cover in the trunk. Follow these steps to access the jack and
spare tire.

NOTE:

The spare tire must be removed in order to access

the jack.

1. Open the trunk.

2. Lift the access cover using the pull strap.

3. Remove the fastener securing the spare tire.

4. Remove the spare tire.

5. Remove the fastener securing the jack.

Opening The Access Panel

Spare Tire Fastener

WHAT TO DO IN EMERGENCIES

383

Summary of Contents for 300 2017









































































































































































































































































































































































































































































































Search results

Summary of Contents for 300 2017

Reviews:

Related manuals for 300 2017

Brands by name

Popular brands

Chrysler 300 2017, Owner'S Manual

Search results

Summary of Contents for 300 2017

Reviews:

Related manuals for 300 2017

Brands by name

Popular brands