Chrysler 300 2017 Owner'S Manual Download Page 232

Page: 232 / 488

The system allows the driver to select information by
pushing the following buttons mounted on the steering
wheel:

Up And Down Arrow Buttons:

Using the

down

arrow button allows you

to cycle through the Main Menu Items.

Changes the Main Screen area and Menu Title
area.

Left And Right Arrow Buttons:

Using the

left

right

arrow button allows you

to cycle through the submenu items of the Main
menu item.

NOTE:

•

Holding the

down

arrow button or

left

right

arrow button will loop the user through the currently
selected menu or options presented on the screen.

•

Main menu and submenu’s wrap for continuous scroll-
ing.

•

Upon returning to a main menu, the last submenu
screen viewed within that main menu will be displayed.

OK Button:

For Digital Speedometer

•

Pushing the

button changes units (MPH or km/h).

Instrument Cluster Display Controls

230

UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for 300 2017









































































































































































































































































































































































































































































































Search results

Summary of Contents for 300 2017

Reviews:

Related manuals for 300 2017

Brands by name

Popular brands

Chrysler 300 2017, Owner'S Manual

Search results

Summary of Contents for 300 2017

Reviews:

Related manuals for 300 2017

Brands by name

Popular brands