Chrysler 300 2017 Owner'S Manual Download Page 327 | Manualshive

Page: 327 / 488

background image

Partial Off

The “Partial Off” mode is intended for times when a more
spirited driving experience is desired. This mode may
modify TCS and ESC thresholds for activation, which
allows for more wheel spin than normally allowed. This
mode may be useful if the vehicle becomes stuck.

To enter the “Partial Off” mode, momentarily push the
“ESC Off” switch and the “ESC Off Indicator Light” will
illuminate. To turn the ESC on again, momentarily push
the “ESC Off” switch and the “ESC Off Indicator Light”
will turn off.

WARNING!

When in “Partial Off” mode, the TCS functionality of
ESC, (except for the limited slip feature described in
the TCS section), has been disabled and the “ESC Off
Indicator Light” will be illuminated. When in “Partial
Off” mode, the engine power reduction feature of TCS
is disabled, and the enhanced vehicle stability offered
by the ESC system is reduced.

NOTE:

•

For vehicles with multiple partial ESC modes a momen-
tary button push will toggle the ESC mode. Multiple
momentary button pushed may be required to return to
ESC On.

•

Trailer Sway control (TSC) is disabled when the ESC
system is in the “Partial Off” mode.

•

⬙

ESC Sport

⬙

and

⬙

ESC Track

⬙

(if equipped) are ESC

partial off mode(s).

Full Off – If Equipped

This mode is intended for off-highway or off-road use only
and should not be used on any public roadways. In this
mode, TCS and ESC features are turned OFF. To enter the
“Full Off” mode, push and hold the “ESC Off” switch for
five seconds while the vehicle is stopped with the engine
running. After five seconds, a chime will sound, the “ESC
Off Indicator Light” will illuminate, and the “ESC OFF”
message will display in the instrument cluster. To turn ESC
ON again, momentarily push the “ESC Off” switch.

NOTE:

System may switch from ESC “Full Off” to Partial

mode when vehicle exceeds a predetermined speed. When
the vehicle speed slows below the predetermined speed the
system will return to ESC “Full Off”.

5

STARTING AND OPERATING

325

«
...
325
326
327
328
329
...
»

Summary of Contents for 300 2017









































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 300 2017

Brand: Harbor Freight Tools Pages: 4

Electronic Parking Disc II

Brand: Jacob Jensen Pages: 28

Brand: AMP Research Pages: 12

Half Size Trunk Box Organizer C-TBO-CV

Brand: Havis-Shields Pages: 1

Brand: Volvo Pages: 8

Lippert Components LEVELEGS MPD 66385

Brand: Atwood Pages: 6

65 41 2 152 528

Brand: BMW Pages: 21

Brand: FALCON RIDGE Pages: 8

Brand: Scosche Pages: 8

Calispace Ocean 80

Brand: Calitop Pages: 5

Brand: Hyundai Pages: 19

Brand: Westfalia Pages: 10

Brand: Prorack Pages: 10

Brand: Qeedon Pages: 2

Brand: Subaru Pages: 32

Brand: Saab Pages: 288

Brand: Volvo Pages: 92

Brand: Westin Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands