Chrysler 300 2017 Owner'S Manual Download Page 451 | Manualshive

Page: 451 / 488

background image

FLUIDS, LUBRICANTS, AND GENUINE PARTS

Important Information

CAUTION!

•

Mixing of engine coolant (antifreeze) other than
specified Organic Additive Technology (OAT) en-
gine coolant (antifreeze), may result in engine dam-
age and may decrease corrosion protection. Organic
Additive Technology (OAT) engine coolant is differ-
ent and should not be mixed with Hybrid Organic
Additive Technology (HOAT) engine coolant (anti-
freeze) or any “globally compatible” coolant (anti-
freeze). If a non-OAT engine coolant (antifreeze) is
introduced into the cooling system in an emergency,

(Continued)

CAUTION!

(Continued)

the cooling system will need to be drained, flushed,
and refilled with fresh OAT coolant (conforming to
MS.90032), by an authorized dealer as soon as pos-
sible.

•

Do not use water alone or alcohol-based engine
coolant (antifreeze) products. Do not use additional
rust inhibitors or antirust products, as they may not
be compatible with the radiator engine coolant and
may plug the radiator.

•

This vehicle has not been designed for use with
propylene glycol-based engine coolant (antifreeze).
Use of propylene glycol-based engine coolant (anti-
freeze) is not recommended.

7

MAINTAINING YOUR VEHICLE

449

«
...
449
450
451
452
453
...
»

Summary of Contents for 300 2017









































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 300 2017

Brand: Kargo Master Pages: 5

Brand: Daihatsu Pages: 1718

Brand: Pacbrake Pages: 9

Brand: B-Speech Pages: 18

Brand: Raven Pages: 24

Brand: Weather Guard Pages: 4

Brand: Cequent Pages: 9

Brand: TBC Pages: 12

Brand: Phonocar Pages: 2

Brand: Chevrolet Pages: 344

Brand: Prorack Pages: 15

Brand: Mobility Networks Pages: 52

Park Vision VAL632210

Brand: Valeo Pages: 25

Brand: AIS Pages: 2

Brand: Saab Pages: 9

Brand: Grillo Pages: 71

Brand: Toyota Pages: 285

Brand: Brodit Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands